Metering Pump— IX Series

High turn down ratio

Full motor control varies the discharge and suction speeds independently to provide a full turndown ratio of 1000:1.

Energy savings and Eco-friendly

With the use of helical gears and spring assistance, power consumption is reduced by 70% compared to the standard spring back design.

Precise chemical dosing operation

The valve design maintains precise dosing at any flow rate whilst the motor regulates discharge and suction speeds to achieve high accuracy (+/-1%) all with a cost-effective design from a mechanically driven diaphragm pump.

Efficient pump head design is incorporated with high compression

Fast priming without air locks is achieved with a high compression ratio due to a fixed (maximum) stroke length.

Constant injection with low impact

Flow control via discharge speed adjustment (with a fixed suction speed) assures constant injection at any flow rate. This system also reduces impact (inertia force) and load to the discharge line.

Viscous liquid transfer

Standard IX series is capable of pumping liquid viscosities of up to IX-B/C: 1000mPa•s, IX-D: 300mPa•s. Contact us for higher viscosity applications.

Safety design

Standard to all models is a diaphragm rupture detector, protecting users and the environment. Also, a detector for abnormal operation protects the pipework in case of an accidental high discharge pressure caused by clogging or improper operation. A drain hole also ensures safe operation even when the diaphragm is damaged.

IP65

Drive and control units are sealed separately to an IP65 enclosure.

Automatic control

The IX can run in analogue, pulse, batch or interval batch modes.