Caterpillar Engine 【3516C TIER 3】

The 3516C propulsion engine is
available with a wide range of ratings that meet EPA Tier 3 and IMO II
regulations without any additional aftertreatment. These engines provide
efficient operation with electronic governing, cold mode start strategy, and
programmable low idle to minimize fuel consumption. The 3516C engine also
incorporates a closed crankcase ventilation system to lower emissions.

3516C TIER 3 STANDARD EQUIPMENT

AIR INLET SYSTEM

Corrosion-resistant separate circuit aftercooler core, air cleaners with
service indicator, dual turbochargers, closed crankcase ventilation system
CONTROL SYSTEM

Dual A4 engine control modules provide engine control and
monitoring, rigid wiring harness with plug and run connectors on port and
starboard sides
COOLING SYSTEM
·  Separate circuit auxiliary fresh water pump, centrifugal
non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water
pump, expansion tank, engine oil cooler, thermostats and housing
EXHAUST SYSTEM
 Dry gas-tight exhaust manifolds with SOLAS compliant stainless steel heat
shields, dual turbochargers with water-cooled bearings and heat shields,
modular pulse exhaust manifold, single exhaust outlet
FUEL SYSTEM
· Electronically controlled unit injectors, fuel filter with service
indicators, fuel transfer pump, SOLAS compliant fuel connections with spill
shield
INSTRUMENTATION
 Instrument panel shipped loose with Color Marine Power Display (MPD),
alarm horn, overspeed shutdown notification light, emergency stop notification
light, secondary ECU “Ready” light, secondary ECU “Active” light, graphic
display unit for analog or digital display of oil and fuel
  pressure, oil and fuel filter differential, system DC voltage, exhaust
and water temperature, air inlet restriction, service meter, engine speed, fuel
consumption (total and instantaneous)
LUBE SYSTEM
· Pre-lube strategy, top-mounted dual crankcase breathers, oil filter with
service indicators, oil level gauge, oil filler, gear-type oil pump
POWER TAKE-OFFS
· Accessory drives — upper RH, upper and lower LH; two-sided front housing
PROTECTION SYSTEM
· A4 electronic control module with customer programmable engine derate
strategies, engine alarms and diagnostics displayed on local and remote MPDs,
emergency stop pushbutton, safety shutoff protection for oil pressure and water
temperature, overspeed protection
GENERAL
· Vibration damper and guard, Cat® yellow paint, two lifting eyes attach to
engine block,
ISO CERTIFICATION
· Factory-designed systems built at Caterpillar ISO 9001:2000 certified
facilities