JB-MG-J4100 gas fire extinguishing system control panel02

product description

JB-MG-J4100 gas fire extinguishing system
control panel is a new generation of industrial alarm fire extinguishing device
which is newly introduced by the company and meets GA61-2010 “General
technical conditions for driving and control devices for fixed fire
extinguishing systems”.

The control panel of J4100 gas fire
extinguishing system is based on high-performance PLC such as
AB/SCHNEIDER/SIEMENS. The site is equipped with a differential temperature
probe, a point-type smoke detector, a combustible gas detector, and a flame
detector. Cable type temperature detector, industrial start-stop button,
pressure transmitter and other components, and gas fire extinguishing device, water
mist fire extinguishing device, foam fire extinguishing device, etc.,
constitute a complete fire, gas detection alarm fire control system (Fire Alarm
and Gas Detector System). The J4100 accurately detects the danger of fire and
flammable gas through the front-end fire detector, triggers the alarm signal
from the corresponding alarm device, and determines the alarm level and
controls the necessary linkage equipment according to the severity level of the
accident, and starts the fire control. Process, implement automatic
firefighting, timely control, and eliminate dangerous situations, thus avoiding
major disasters, reducing damage to personnel and equipment and environmental
impact. JB-MG-J4100 gas fire extinguishing system control panel can be widely used
in industrial sites of marine operating platforms, chemical plants, oil
refineries, substations and metal processing plants to provide safety
protection for metallurgical, petroleum, chemical, electric power and other
production sites.

Features

1 Select PLC with high-speed running bus as
the main control system, with quick response and timely action;

2 Adopt point-to-point signal acquisition
and control mode for main equipment, single-point I/O fault, only adversely
affect individual equipment, and hinder the overall operation of the system;

3 10.4 inch color touch screen and
fire-fighting HMI human-machine interface software, easy to operate, clear and
intuitive display;

4 Rich bit instructions, communication
instructions, timer instructions, counter instructions… can implement complex
logic control;

Such as: main release / continuous release
delay, valve operation in place automatically stop, after the isolation valve
is opened, it is forbidden to start fire extinguishing…

5 Manual, automatic, remote and other
control methods, through the serial port or Ethernet interface, can realize the
status of remote monitoring and control system related equipment;

6 It has various fault self-diagnosis
functions such as short circuit of equipment connection line, open circuit,
grounding, and undervoltage of power supply;

7 Comply with GA61-2010 “General
technical conditions for driving and control devices for fixed fire
extinguishing systems”