J-XK2080B field control panel

The J-XK2080B field control panel is
specially designed for important places and is suitable for installation at the
entrance and exit of fire protection areas such as subways, power plants and
mobile complexes.

Each fire extinguishing zone needs to be
equipped with a J-XK2080B field control panel. The J-XK2080B field control
panel does not need to be registered, and can provide the following signals:

1. Hand automatic state output signal
(passive contact signal);

2. Linkage status output signal (passive
contact signal);

3, sound and light alarm output signal
(active 24V output signal);

4, deflation indicator output signal
(active 24V output signal);

5, linkage output signal (active 24V output
signal);

6, the main discharge solenoid valve drive
signal (active 24V output signal);

7. Continue to release the solenoid valve
drive signal (active 24V output signal);

8. Main discharge pressure switch action
output signal (passive contact signal);

9. Continue to release the pressure switch
action output signal (passive contact signal);

10. Receiving a main discharge pressure
switch state signal or its corresponding feedback signal (passive contact
signal);

11. Receiving a continuous release pressure
switch state signal or its corresponding feedback signal (passive contact
signal);

12, receiving the start and stop signal of
the start and stop button (passive contact signal);

13. Receive the status signal of the
automatic switch of the hand (passive contact signal);

14. Receive the discharge/disable switch
signal (passive contact signal).