|
Product type no. Technology refers to the standard |
HW6C |
HW9C |
HW6528K |
|
Pressure ratio |
65：1 |
32：1 |
65：1 |
|
Diameter of pneumatic motor (mm) |
240 |
240 |
260 |
|
Maximum intake pressure (MPa) |
≤0.6MPa |
≤0.6MPa |
≤0.6MPa |
|
No-load displacement (L/min) |
25 |
51 |
28 |
|
Maximum nozzle flow (the sum of one or more) (L/min) |
5 |
6 |
5 |
|
Main air line diameter (mm) |
≥19 |
≥25 |
≥25 |
|
Specification for air compressor (m3/min) |
≥1.5 m3 |
≥2.0 m3 |
≥2.5 m3 |
|
Weight (bare) (Kg) |
≤55 |
≤60 |
≤68 |
High pressure airless sprayer
-
Working principle:
The principle of
high-pressure airless spraying is to use the high-pressure plunger pump to
continuously transfer the paint into the closed paint pipeline, so as to form a
high pressure in the closed space, and then release the trigger of the spray
gun connected to the end of the paint pipe, so that the high-pressure paint
flow is forced through the extremely small nozzle to form atomization, so as to
reach the coated surface.Job features:
High spraying
efficiency, high output, very suitable for engineering, less
“overspray” and paint rebound higher transmission efficiency, saving
paint.Can spray higher viscosity coating, without excessive water, a film
thickness is thicker, without multiple spraying.Strong penetration force,
increase the mechanical bite force between coating and wall, good spraying
quality, reduce construction cost and improve competitiveness.Compared with
manual brush roller, high-pressure airless spraying spraying efficiency is 10
times of artificial brush roller, brush roller coating cost is far lower than
the artificial, spraying coating level off is smooth, no brush marks, roll
mark, dealing with uneven parts easily, and can save coating, high adhesion of
coating, coating and long life.
محصولات مرتبط
نقد و بررسیها
هنوز بررسیای ثبت نشده است.
نقد و بررسیها
هنوز بررسیای ثبت نشده است.