Heat insulation clothing

Txf-93-1 fire
protective clothing is made of composite material of fiber fabric and
aluminized film.Clothing includes jacket, trousers, gloves, helmet and cover
feet, without asbestos, with light weight, high strength, flame retardant, high
temperature resistance, heat radiation resistance, wear resistance, folding
resistance and non-toxic and harmless to human body and other advantages, can
effectively protect firefighters and high-temperature operation personnel not
to be burned by flames, high temperature.The product has been tested by the
national fire equipment quality supervision and testing center and is qualified
to meet the requirements of ga88-94 “performance requirements and test
methods for fire insulation clothing”.Marine protective clothing approved
and inspected by China classification society.

The main
performance

1. Flame retardant
property damage length is less than 100mm, smolder time is less than 5 seconds,
and reburning time is less than 2 seconds.

2, thermal
radiation resistance in 10 kw/m2 after 30 s under the radiation of heat
radiation, its surface temperature is not more than 25 ℃.

3. The anti-seepage
performance is greater than 4000Pa.

Precautions for use

1, as usual to wear
a coat and trousers.Fire boots should be worn in the trousers tube, and then
buckle the buckle on the trousers tube mouth to prevent water

And the molten
material is poured into the boot.

2. The heat
insulation clothing has the function of heat insulation and flame retardant,
but it cannot be put into the flame zone or too close to the concentrated heat
source to avoid

Avoid direct
contact with flame and molten metal to prevent damage to clothing and human
body.

3, remove clothing
dirt can be wiped with a damp towel, especially dirt can also be used soft
cloth dipped in a little prepared

The washing
solution is scrubbed on the surface and then dried thoroughly.Do not immerse
the garment in water or rub it vigorously to prevent aluminum plating

Film layer, off.

4, fire insulation
clothing should be stored in a dry and ventilated place, regular exposure, to
prevent mildew and damage.